This product adds a larger grip to keys to allow for easier turning.
Fabrication instructions
Requirements: FDM 3D printer
Material: PETG/PLA, Keys, 4mm nut and bolts, 4mm washer (optional)
Nozzle Size: .6mm
Layer Width: .2mm
Supports: Yes
Infill: 15%
Build Plate Adhesion: Skirt
Designer Credit: Ivan_Gee
Assembly Instructions
- Download STL file
- Print STL file
- Line up users key with the open slot
- Place 4MM nut between the key and device
- Secure but screwing into 4mm bolt
- Once adjusted, tighten the bolt
- Once secured use device as needed for any doors with
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International. All products are subject to the IATP Terms and Conditions.
